>>>>   Printable Instructions    <<<<
  Home Page   The SideKick Tool   Using the SideKick   Real People Talk   Order the SideKick  Instructions

Easy Instructions for the SideKick can be printed here.
(click here for easy print file)
Untitled Document

Procedure for Cleaning Window

Air Conditioner While In Place

 

 

    • Turn off power to unit.
    • Connect AIR CON cleaning tool to a garden hose.
    • Be sure the valve on the AIR CON cleaning tool is closed.
    • Turn on the supply water.
    • Familiarize yourself with the AIR CON cleaning tool.  Slowly open the valve.  Be careful.  It has a strong kick-back effect.
    • Starting at the top of the condenser, work the AIR CON cleaning tool back and forth, dropping down an inch at a time until water flows freely through the condenser.
    • Continue backflushing for a few minutes to remove dirt from the bottom of the unit.
    • Do not restore power for at least 24 hours after servicing, or possible electrical short circuits could be caused by water residue in the unit.

     

    Procedure for Cleaning

    Central Units

     

     

      • Cut the power to the unit by removing the fuses or turning off the circuit breakers.
      • Take the top off the cabinet of the condensing unit.
      • Use a plastic sheet or baggie to prevent water from getting into the condenser fan motor or any other piece of electrical wiring or equipment.
      • Connect AIR CON cleaning tool to a garden hose.
      • Make sure the valve on the AIR CON cleaning tool is closed.
      • Turn on the supply water.
      • Slowly open the valve to get the feel of the cleaning tool.  Be careful.  It has a strong kick-back effect.
      • Starting at the top of the condenser, work the AIR CON cleaning tool back and forth, dropping down an inch at a time until water flows freely and the entire condenser has been flushed clean.
      • Remove any covering you may have installed to protect the fan or electrical wiring.
      • Replace the cover.
      • Restore power to the unit.

       

      Procedure for Cleaning

      Window Air Conditioner

      When Removing Unit from Case

       

        • Turn off power to unit.
        • Remove the unit from its case and take to an appropriate place for cleaning.
        • Cover the condenser fan motor openings and protect any exposed electrical wiring or equipment with a plastic sheet or baggie.
        • Connect AIR CON cleaning tool to a garden hose.
        • Be sure the valve on the AIR CON cleaning tool is closed.
        • Turn on the supply water.
        • Familiarize yourself with the AIR CON cleaning tool.  Slowly open the valve.  Be careful.  It has a strong kick-back effect.
        • Clean the condenser by backflushing until water flows through it freely.
        • Remove any plastic you installed to protect unit.
        • Replace unit in case.
        • Restore power.

         

         


         

        Each SideKick Tool is covered by a
        >>>        30 Day Money Back Satisfaction Guarantee   <<<

        We use PayPal.com as a Secure Purchase site.
        Your Purchase is safe and secure.

        Not Sold In Stores